The method of shortening automatic belt buckle

Edit by shortening method
Generally, the leather belt bought by everyone will be sent to you with a size longer than your actual waistline. At this time, you need to shorten the belt by yourself to make it fit your waistline.

Tools / raw materials
Tools: scissors
Raw material: automatic buckle belt

Step / method

(1) First, use scissors to pry open the fixing teeth on the back of the buckle, as shown in the figure. Be careful not to scratch the buckle.

First step

(2) Pull out the belt, you can see the indentation of the belt head pressed out by the fixed teeth. As shown in the figure

The second step

(3) Compare your waistline and cut off the extra parts according to the required length. Pay attention to the part of the belt head instead of the belt tail, as shown in the figure. The actual cut should be longer than the length of your waistline, leaving room.

The third step

(4) Connect the belt body with the button head again, as shown in the figure. Press the fixed teeth and the buckle will automatically tighten the belt.

The fourth step

Difference between automatic mouth and smooth buckle

The smooth buckle is a small bag protruding from the buckle head, which is inserted into the buckle eye when wearing.
Automatic button is a small thing that can be moved under the button head. There is no button hole in the belt itself. It can adjust the waist size by moving that small device.